5M- HTD Pulleys 15mm Wide (Pilot Bored)

Bearingtech pulleys are manufactured in high quality Steel, Aluminium or cast Iron and machined to close tolerances to ensure concentric running. This ensures that when these pulleys are used they offer accurate synchronisation of speed, efficiency and performance.
Bearingtech offer a large range of Megadyne belts to suit the HTD Belt Sections 3M - 5M - 8M -14M


Part Number P12 -5M-15F

Reference: P=Pilot Bored
12 = Number of teeth
5M= Pitch
15 = width belt
f= Flanged

5M Timing Belt Pulley Metric (Pilot Bored)

To Suit15mm Wide Belt

Mat'l	Part Numbers	No. Teeth	Type	Dp	De	Df	Dm	F	L	Bore	No. Flanges
St.	P12-5M-15F	12	1F	19.1	17.96	23	13	20.5	26	-	2
St.	P14-5M-15F	14	1F	22.28	21.14	25	13	20.5	26	6	2
St.	P15-5M-15F	15	1F	23.87	22.73	28	16	20.5	26	6	2
St.	P16-5M-15F	16	1F	25.46	24.32	28	16.5	20.5	26	6	2
St.	P18-5M-15F	18	1F	28.65	27.51	32	20	20.5	26	6	2
St.	P20-5M-15F	20	1F	31.83	30.69	36	23	20.5	26	6	2
St.	P21-5M-15F	21	1F	33.42	32.28	38	24	20.5	26	6	2
St.	P22-5M-15F	22	1F	35.01	33.87	39	25.5	20.5	26	6	2
St.	P24-5M-15F	24	1F	38.2	37.06	42	27	20.5	28	6	2
St.	P26-5M-15F	26	1F	41.38	40.24	44	30	20.5	28	6	2
St.	P28-5M-15F	28	1F	44.56	43.42	48	30.5	20.5	28	6	2
St.	P30-5M-15F	30	1F	47.75	46.6	51	35	20.5	28	6	2
St.	P32-5M-15F	32	1F	50.93	49.79	54	38	20.5	28	8	2
St.	P36-5M-15F	36	1F	57.3	56.16	60	38	20.5	28	8	2
St.	P40-5M-15F	40	1F	63.66	62.52	71	38	20.5	28	8	2
Alu.	P44-5M-15	44	3	70.03	68.89	-	38	20.5	30	8	-
Alu.	P48-5M-15	48	3	76.39	75.25	-	38	20.5	30	8	-
Alu.	P60-5M-15	60	3	95.49	94.35	-	50	20.5	30	8	-
Alu.	P72-5M-15	72	3	114.59	113.45	-	50	20.5	30	8	-

If you require any further information or sizes, please don‰۪t hesitate to contact Bearingtech.