Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)
Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)

Taper Bush 1108 Metric, Shaft Size From 9mm - 28mm (1)

  • Sale
  • £12.21

 

Taper Lock bushes are suitable for use with Sprockets, Belt Pulleys & couplings 
Taper lock bushes are used to secure Taper Lock Pulleys, Sprockets or Couplings to Shafts. The Taper lock Bush fits into the hub with 2 grub screws, as the grub screws are tightened the Taper lock compresses onto the shaft and keyway securing the Pulley/Sprocket. To remove the bush, you remove the 2 grub screws and screw one back into the third hole, lifting the bush out.

  • Easy installation and removal.
  • No reboring as full range of both metric and imperial available.
  • Totally proven bush system. millions used world-wide.
  • Fitting instructions with every Bearingtech taper lock bush.
  • All the bushes supplied by Bearingtech are of the highest quality, made from cast iron and come individually boxed.

BUSH SIZE

Hub Dia = mm

Hub Length = mm

Set Screws BSW

Bore sizes available

1108

38.3

22.3

1/4 x 1/2"

9mm to 28mm





Please select Metric Shaft size from drop down menu