5M - HTD Pulleys 9mm Wide P14 (Pilot Bored)

Bearingtech pulleys are manufactured in high quality Steel, Aluminium or cast Iron and machined to close tolerances to ensure concentric running. This ensures that when these pulleys are used they offer accurate synchronisation of speed, efficiency and performance.

Bearingtech offer a large range of Megadyne belts to suit the HTD Belt Sections 3M - 5M - 8M -14M


Part Number P14 -5M-9F

Reference: P=Pilot Bored
14= number of teeth
5M= Pitch
9 = width belt
f= Flanged

5M Timing Belt Pulley Metric (Pilot Bored)

To Suit 9mm Wide Belt

Mat'l	Part Numbers	No. Teeth	Type	Dp	De	Df	Dm	F	L	Bore	No. Flanges
St.	P12-5M-09F	12	1F	19.1	17.96	23	13	14.5	20	4	2
St.	P14-5M-09F	14	1F	22.28	21.14	25	13	14.5	20	6	2
St.	P15-5M-09F	15	1F	23.87	22.73	28	16	14.5	20	6	2
St.	P16-5M-09F	16	1F	25.46	24.32	28	16.5	14.5	20	6	2
St.	P18-5M-09F	18	1F	28.65	27.51	32	20	14.5	20	6	2
St.	P20-5M-09F	20	1F	31.83	30.69	36	23	14.5	22.5	6	2
St.	P21-5M-09F	21	1F	33.42	32.28	38	24	14.5	22.5	6	2
St.	P22-5M-09F	22	1F	35.01	33.87	39	25.5	14.5	22.5	6	2
St.	P24-5M-09F	24	1F	38.2	37.06	42	27	14.5	22.5	6	2
St.	P26-5M-09F	26	1F	41.38	40.24	44	30	14.5	22.5	6	2
St.	P28-5M-09F	28	1F	44.56	43.42	48	30.5	14.5	22.5	6	2
St.	P30-5M-09F	30	1F	47.75	46.6	51	35	14.5	22.5	6	2
St.	P32-5M-09F	32	1F	50.93	49.79	54	38	14.5	22.5	8	2
St.	P36-5M-09F	36	1F	57.3	56.16	60	38	14.5	22.5	8	2
St.	P40-5M-09F	40	1F	63.66	62.52	71	38	14.5	22.5	8	2
Alu.	P44-5M-09	44	3	70.03	68.89	-	38	14.5	25.5	8	-
Alu.	P48-5M-09	48	3	76.39	75.25	-	45	14.5	25.5	8	-
Alu.	P60-5M-09	60	3	95.49	94.35	-	45	14.5	25.5	8	-
Alu.	P72-5M-09	72	3	114.59	113.45	-	45	14.5	25.5	8	-

If you require any further information or sizes, please don‰۪t hesitate to contact Bearingtech.