5M- HTD Pulleys 25mm Wide (Pilot Bored)

Bearingtech pulleys are manufactured in high quality Steel, Aluminium or cast Iron and machined to close tolerances to ensure concentric running. This ensures that when these pulleys are used they offer accurate synchronisation of speed, efficiency and performance.
Bearingtech offer a large range of Megadyne belts to suit the HTD Belt Sections 3M - 5M - 8M -14M


Part Number P34 -5M-25F
Reference: P=Pilot Bored
12= number of teeth
5M= Pitch
25= width belt
f= Flanged

5M Timing Belt Pulley Metric (Pilot Bored)

To Suit 25mm Wide Belt

Product Sizes

Mat'l	Part Number	No. Teeth	Type	Dp	De	Df	Dm	F	L	Bore	No. Flanges
St.	P12-5M-25F	12	1F	19.1	17.96	23	13	30.5	36	-	P
St.	P14-5M-25F	14	1F	22.28	21.14	25	13	30.5	36	6	2
St.	P15-5M-25F	15	1F	23.87	22.73	28	16	30.5	36	6	2
St.	P16-5M-25F	16	1F	25.46	24.32	28	16.5	30.5	36	6	2
St.	P18-5M-25F	18	1F	28.65	27.51	32	20	30.5	36	6	2
St.	P20-5M-25F	20	1F	31.83	30.69	36	23	30.5	36	6	2
St.	P21-5M-25F	21	1F	33.42	32.28	38	24	30.5	38	6	2
St.	P22-5M-25F	22	1F	35.01	33.87	39	25.5	30.5	38	6	2
St.	P24-5M-25F	24	1F	38.2	37.06	42	27	30.5	38	6	2
St.	P26-5M-25F	26	1F	41.38	40.24	44	30	30.5	38	6	2
St.	P28-5M-25F	28	1F	44.56	43.42	48	30.5	30.5	38	6	2
St.	P30-5M-25F	30	1F	47.75	46.6	51	35	30.5	38	6	2
St.	P32-5M-25F	32	1F	50.93	49.79	54	38	30.5	38	8	2
St.	P36-5M-25F	36	1F	57.3	56.16	60	38	30.5	38	8	2
St.	P40-5M-25F	40	1F	63.66	62.52	71	38	30.5	38	8	2
Alu.	P44-5M-25	44	8	70.03	68.89	-	38	30.5	40	8	-
Alu.	P48-5M-25	48	3	76.39	75.25	-	38	30.5	40	8	-
Alu.	P60-5M-25	60	3	95.49	94.35	-	50	30.5	40	8	-
Alu.	P72-5M-25	72	3	114.59	113.45	-	50	30.5	40	8	-

If you require any further information or sizes, please don‰۪t hesitate to contact Bearingtech.